Sale1@nblaike.cn    +86-13567845999
Cont

Have any Questions?

+86-13567845999

Jan 04, 2026

Hydraulic Fitting Types And Applications

China hydraulic fitting manufacturer,Hydraulic fittings are used for connecting a hydraulic hose to components like hydraulic cylinders, pipes, tubes, or different types of hydraulic hoses in hydraulic systems. They have a wide range of types for various applications. The different kinds of hydraulic fittings allow the fluid to flow, change its direction, divert, or mix. These fittings should be capable of creating a good seal and leak-free in the application.

  • Choose ORFS Fittings for high-pressure applications, it has a leak-free connection with an o-ring face seal.
  • Choose JIC Fittings for high-pressure systems-these durable, easy-to-install fittings are engineered with reliable 37° flare seating surfaces.
  • Choose ISO Hydraulic Fittings, they can meet strict industry standards and are specifically tailored for applications in the agriculture and chemical sectors.

 

ORFS fittings from China hydraulic fitting supplier

ORFS (O-Ring Face Seal) fittings, there are an o-ring groove at the flat face of the fitting. These fittings are used for high-pressure applications and provide a leak-free connection.The following is the Specifications of ORFS fittings.

  • Thread type: Inner thread flare/FEMALE (UNF), outer thread conical/MALE (NPT/NPTF), outer thread cylindrical/MALE (BSPP-G), Outer thread flare/MALE (UNF), and outer thread/MALE metric.
  • Maximum pressure at 20 °C (bar): 250, 400, and 630 (straight, tee, and cross)

○ The elbow fittings(45°90°) for 200, 250, 315, 400, and 630 bar.

  • Maximum pressure at 68 °F (psi):3,626, 5,801, and 9,137 (straight, tee, and cross)

○ The elbow fittings(45°90°) for 2,901, 3,626, 4,569, 5,801, and 9,137 psi.

  • Features: ORFS fittings have a gasket. They also have reducer or bulkhead features.
  • Reducer: Used to connect in different sizes.
  • Bulkhead: Used to connect hydraulic parts with a barrier between them (e.g., a metal panel)

 

JIC fittings from China hydraulic fitting factory

JIC fittings( Joint Industry Council fittings), they have the 37° flare seating surfaces, which provide reliable, leak-proof seals. These fittings are used for high-pressure applications and are well-known for their durability and ease of assembly and disassembly. The following is the Specifications of JIC fittings.

  • Thread type: Inner thread conical/FEMALE (NPT), inner thread cylindrical/FEMALE (BSPP-G), inner thread flare/FEMALE (UNF), outer thread cylindrical/MALE (BSPP-G), outer thread flare/MALE (UNF), outer thread/MALE metric, and outer thread/MALE JIC.
  • Material: Steel and stainless steel
  • Seal material: FKM, NBR, HD-seal, soft seal
  • Maximum pressure at 20 °C: 75 to 450 bar (1090 to 6525 psi)
  • Features

○ Reducer: Used to connect in different sizes.

○ Adjustable: There is a lock nut that provides a tighter, more secure connection.

 

ISO hydraulic fittings

Different ISO standards cover various hydraulic fittings. Standards like ISO are very important because they ensure quality, safety, and consistency in the hydraulic industries.

  • ISO 7241: This standard mainly outlines the interface dimensions and basic performance standards for two types of hydraulic quick couplings, both widely used and technologically similar.

○ ISO 7241 A: Series A is mainly used in Europe market and is favored globally on agricultural and forestry machines.

○ ISO 7241 B: Series B is mainly used in North America market and the chemical industry.

  • ISO 16028: This standard outlines the interface dimensions and performance standards for flat-face hydraulic quick couplings used at working pressures from 100 bar to 315 bar, depending on size. These couplings are designed to prevent fluid leaks when disconnected, but they must be disconnected when the system is not pressurized.
  • ISO 14540: This standard defines size and performance standards for hydraulic screw-to-connect couplings used at pressure 72 MPa (720 bar), typically connecting a hydraulic power unit to a tool(For example, hydraulic jacks, rams, clamping devices, hand tools, and cylinders and so on).
  • ISO 14541: This standard defines the dimensional and performance requirements for hydraulic screw-to-connect quick couplings for general use.

 

How to Select China hydraulic fitting wholesale

Consider the following criteria before selecting the correct hydraulic fitting types for your application:

  • Material: The material of the hydraulic fitting should be compatible for the hydraulic fluid and the operating environment. The most commonly used fitting materials are steel, or stainless steel. NBR is the material for o-ring seals.
  • Size of Connection: Size of connections depends on the connection type:

○ Threaded: Inch or metric(e.g., 1.1/4 inch or M22 x 1.5)

○ Cutting ring connection: Cutting ring size from 8 mm to 30 mm.

  • Nominal bore: This indicates the approximate I.D. of the coupling's passage through which the fluid flows. It is a standardized size designation to ensure compatibility and interchangeability between different components in a hydraulic system.
  • Maximum pressure at 20 °C (bar): Selecting the right maximum pressure for a hydraulic coupling is very important, it ensures safety, optimal performance, durability, system integrity, and compliance with industry standards.

 

FAQs

What are hydraulic fittings?

Hydraulic fittings connect hoses with hoses or components like cylinders or pipes, allowing fluid to flow, change direction, divert, or mix.

How to install hydraulic fittings?

Choose the right fittings, cut the hose with right length, insert it with the fitting, crimp it, and clean the assembly to prevent debris from entering the system.

How to seal hydraulic fittings?

Hydraulic fittings are self-sealing. For examples,SAE flanged fittings, sealed by o-ring, or through the use of thread sealant.

 

China hydraulic adapter factory

 

Send Inquiry