Selection Criteria For Quick Connectors

1. The type and temperature of the fluid (please select the appropriate type and temperature of the body material and sealing material for the quick connector)
According to the fluid, the suitable body material and sealing material are different. For example, quick connectors are made of air. It is recommended to make it of steel. If it is made of water, choose brass or stainless steel.
2. The pressure of the liquid (please select a quick connector that is suitable for the pressure resistance of the fluid)
The pressure of the fluid is also the key to selecting a quick connector. The quick connector used for oil pressure is 5.0Mpa (51kgf/cm)& ²)- 68.6Mpa (700kgf/cm)& ²) Serialization is formed between them, and corresponding to the pressure resistance characteristics, the construction of quick connectors is also different.
3. Construction of automatic opening and closing valves (please select a quick connector suitable for piping purposes)
For the construction of valves, there are two way switch type, one-way switch type, and two way open type. Due to the presence of fluid flowing out of the piping during separation, except for the two switch type. So please pay attention.