How to choose proper hydraulic hose fittings?
China hydraulic fitting factory Nowadays there are many types of tools and machinery that require a specific kind of sealing. Thread types are also different according to design characteristics and technical features of the equipment. So hydraulic hose fittings are used for the flexible connection between two fluid ports.
China hydraulic fitting manufacturer Hydraulic hoses are easily installed and uninstalled if necessary. However, at first sight, thread shapes are similar with each other. It complicates the process of identification of the most hydraulic hose fittings for purchase, repair works, or modification of equipment. There are 5-steps algorithm for the determination of the needed connection.
The simple 5-step to identify hydraulic hose fittings:
Step 1: Define the fitting type
China hydraulic fitting supplier There are two kinds of fitting: crimped and reusable. In most cases, the crimped type of hydraulic hose is used because the second one is considered the old-school one. New equipment requires a crimped type of fitting that is installed with the crimping machine.
It is worth noting that the hydraulic hose fitting can not be used again after the assembly was damaged or something went wrong. To sum up, much more likely you will define the crimped fitting type. If you face old equipment and are doubtful of its origin, check the following signs of reusable fittings:
The reusable fitting do not need crimping machine are used for its installation.
The reusable type of fittings is installed on the hose with the help of thread inside.
Step 2: Match port connections
China hydraulic fitting wholesale Fitting ends are different. According to their connection type and the specified end, the right hose is selected. For example, a 4-bolt flange is one of the connection types. It is suitable for both metric and BSPP (British standard pipe parallel thread) 60⁰ cone tube coupling (hose connection).
Other possible correct installations are presented in the table below:

Step 3: Identify the sealing type
China hydraulic adapter factory To find an correct fitting, it is necessary to consider prime technical characteristics and their physical dimensions (diameter, size, etc.). Let's take a look at the main types of hose fittings.
O-Ring seal designs:
The main purpose of the O-ring sealing technique is to provide the seal itself. There are follow main three types:
O-ring boss
Flat face O-ring seal (Female)
O-ring flange
Mated Angle:
The sealing technique is based on two kinds of threads: straight and parallel. There are male thread and female thread that form the sealing itself. The follow are the graphics that describes all the possible variants of the mated-angle type of threads.
Seat Angle
30° Mainly for BPS and Japanese Industrial Standard

37° Mainly for JIC standard.

Tapered Threads
This technique is well-known with inside-thread female items and outside-thread male items. The follow graphical description of the NPT (National Pipe Tapered) and BSPT (British Standard Pipe Tapered) models

Step 4: Detect the fitting design with the help of visual analysis
There are a lot of combinations of actual dimensions, O-ring position, seat angle degrees, etc. All aspects should be taken into account. Note that the seat Angle is very import. This procedure can be done with a seat gauge. The most common fitting terminations were performed in the tables below.
O-Ring Face Seal
We take a look at three fitting with flat-faced seats. Seat angle measuring is not required. The most necessary factor is the O-ring location:

Mated Angle Seat with O-ring
In this case, the nose seat is inverted. Both fitting designs need to be attention with the inside location of the O-ring. The seat angle should be measured.

Mechanical Joint / Mated Angle
These sealing techniques do not require O-ring. We divided all fitting terminations according to the type of nose seats. There are two tables as follow.
For the standard nose seat
Confirm the seat angle degree first.

For the inverted nose seat
Confirm the seat angle degree first.

Thread Interface
There are two types of fitting to take into account: NPT (National Pipe Tapered) and BSPT (British Standard Pipe Tapered).
Step 5: Confirm the Tread Size
You need a thread gauge. Note that thread is determined in inches. In the following pictures, both cone and hex showings are presented. Use these diagrams for an easy determination process.
Male and Female Thread Sizes
The size include:1/8"-02,1/4"-04,3/8"-06,1/2"-08,3/4"-12,1"-16,1.1/4"-20,1.1/2"-24,2"-32,3"-48 and 4"
In the end, choosing the correct hydraulic hose fittings is all about attention to detail and alignment with your system's unique requirements. From material and connection style to pressure and environmental factors.If you have more questions, kindly contact with our email:sale1@nblaike.cn
















